Court Summary - at a glance
Date of offence:
                        28 February 2020
                    Plea:
                        Found guilty
                    Decision:
                        Convicted
                    Final decision date:
                        
                    Fine imposed:
                        8 months home detention
                    Safety lessons learned:
                                The defendant failed to:
- correctly test prescribed electrical work, namely the installation of a socket-outlet, in accordance with regulation 63 of the Electricity (Safety) Regulations 2010 and AS/NZS 3000:2007, knowing that the failure to correctly test the prescribed electrical work was reasonably likely to cause serious harm or significant property damage, and failed to prevent, so far as reasonably practicable, serious harm or significant property damage.
 - conduct the following tests correctly, using the appropriate test equipment:
- Visual inspection of the work, carried out by verifying the correct circuit connections throughout the circuit, including the switchboard and wall switch used to operate the socket-outlet;
 - Continuity of the earthing system, by measuring between the earth terminal of the socket-outlet and the switchboard earth bar;
 - Insulation resistance test;
 - Polarity test at the installed socket-outlet; and
 - Earth fault loop impedance test.
 
 
Defendant name:
                                Stephen Graham Burton
                            Industry:
                                
                                    
                                        Energy
                                    
                                
                            Date of offence:
                                28 February 2020
                            Facts in brief:
                                Stephen Burton, a registered electrician, was contracted to install a socket-outlet and a rangehood at a residential property. Following the installation, Craig Johnston was engaged to install a casing around the rangehood. Mr Johnston made physical contact with the exterior metalwork of the range-hood and received a fatal electric shock.
At trial the court found that Mr Burton had failed to identify that a functional earthing connection on the socket outlet was missing, due to his failure to carry out the required testing of the installed socket-outlet.
                            At trial the court found that Mr Burton had failed to identify that a functional earthing connection on the socket outlet was missing, due to his failure to carry out the required testing of the installed socket-outlet.
Offence section:
                                Section 163C(2) of the Electricity Act 1992 and regulation 63 of the Electricity (Safety) Regulations 2010
                            Date(s) charged: 
                                
                                    
                                        22 December 2021
                                    
                                
                            Court:
                                Nelson - District Court
                            Plea:
                                Found guilty
                            Final decision date:
                                
                            Decision:
                                Convicted
                            Fine imposed:
                                8 months home detention
                            Maximum fine available:
                                2 years imprisonment or $100,000 or both
                            Reparation:
                                Emotional harm – $50,000
Consequential loss – $100,000
Costs – N/A
                            Consequential loss – $100,000
Costs – N/A
Related Documents:
                                
                            Last updated