We are operating at reduced capacity due to COVID-19 Alert Level Two restrictions. Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
Timber treatment plants store and handle significant quantities of hazardous substances. Careful management of these substances is important to protect people and the environment.
Some of the typical types of chemicals used in timber treatment are:
- Antisapstains, e.g. Hylite and Taratek
- Copper-chromium-arsenic salts, e.g. CCA Oxide and Tanalith C
- Light Organic Solvent Preservatives (LOSP), e.g. Organotect and Protim LCWR
- Boron Salts, e.g Diffusol and Tanalith E
- Alkyl ammonium preservatives, e.g ACQ for Timber Treatment and Mokubo AAC
Timber treatment best practice guideline
We have produced guidance on the safe handling of hazardous substances in the timber treatment industry.
Best practice guideline for the safe use of timber preservatives & antisapstain chemicals
This guidance gives advice on how to safely manage the risks of using hazardous substances timber treatment industry.
While this guidance has not been updated to reflect current work health and safety legislation (the Health and Safety at Work Act 2015 and regulations), it may still contain relevant information and practices to keep workers and others healthy and safe.
Please read this guidance in conjunction with all relevant industry standards that apply to you as a PCBU. This guidance will be progressively reviewed and either updated, replaced with other guidance, or revoked.
Controls on chemicals
To find out what the controls are on the chemical(s) you are using, search the Approved hazardous substances with controls(external link) database and download the substance controls document.
There are a number of key controls that need to be followed to help you comply with the hazardous substances legislation. Use the hazardous substances calculator(external link) to find out about these.
Compliance certification requirements
Depending on the type and quantity of chemicals held at your site, you may require one or more of the following compliance certificates:
- location compliance certificate
- certified handler compliance certificate
- stationary container compliance certificate
If you are unsure about your compliance certification requirements, contact a compliance certifier for advice.
As a general rule, you should keep the quantities of hazardous substances stored on your site to a minimum. In this way the risks may be reduced and the need for compliance certification reduced