Alert: Notifications and correspondence during COVID-19 restrictions
We are operating at reduced capacity due to the COVID 19 Alert Level Two requirements. Find out more about how to correspond and notify us during this time.
Moving vehicles and equipment on manufacturing sites can be fatal if not used correctly and safely.
While this guidance has not been updated to reflect current work health and safety legislation (the Health and Safety at Work Act 2015 and regulations), it may still contain relevant information and practices to keep workers and others healthy and safe.
Please read this guidance in conjunction with all relevant industry standards that apply to you as a PCBU. This guidance will be progressively reviewed and either updated, replaced with other guidance, or revoked.
We have produced guidance for manufacturing sites that use moving vehicles and equipment. Traffic hazards to consider include the safety of the site, vehicle and driver.
Workplace traffic management provides guidance on the layout and traffic flow of a workplace; ensuring vehicles are safe and maintained; and the training, supervision and monitoring of drivers.
Known as mobile plant, they have the potential to cause serious injury or kill someone by striking them or colliding with other vehicles or equipment.
Examples of mobile plant could include forklifts, delivery trucks and other light vehicles.
How can traffic hazards in the workplace be managed?
As an employer, you have a duty to eliminate, isolate, or minimise hazards to your employees. To manage traffic hazards at the workplace consider three main areas:
- safe site
- safe vehicle
- safe driver.
The layout and traffic flow of a workplace is important in keeping people and plant safe as they move around. Consider:
- one way systems
- well marked road/pedestrian areas
- training and inductions for staff and visitors on pedestrian areas and traffic flows
- mirrors on blind spots
- separate entrances for people and plant
- designated crossing points
- sufficient lighting
- speed management (bumps, signage).
These can be of a temporary or permanent nature depending on the site. For example, a small manufacturing site could use pedestrian walkways with crossing points, and temporary barriers when trucks are loading/unloading.
Also assess what other activities are taking place around the workplace, and ways these can be managed. For example, if reversing, loading/unloading, and manoeuvring with loads is taking place, consider:
- reversing/turn-around areas
- designated loading/unloading areas
- a designated safe area for drivers (while loading/unloading)
- spotters to assist vehicle positioning.
Vehicles used in a workplace must be safe for the intended use.
- the design specification of the vehicle
- the loading/capacity of the vehicle
- safe means of access and egress from vehicle cab or trailer unit
- fuel source (eg if used inside, an electric fork lift may be safer than an LPG fuelled fork lift)
- visibility (eg rotating lights, running lights, mirrors, reversing alarms/cameras)
- protective structures (eg falling object protection, roll protection)
- seat belts (eg older fork lifts may need to have a seat belt retro-fitted).
Vehicle maintenance is also important.
You must make sure that vehicles systems/safety controls are working.
Vehicles should be maintained in accordance with manufacturer’s specifications and by a competent person. Consider:
- pre-start checks (kept and logged with vehicle records)
- regular maintenance inspections
- monitoring/auditing checks and inspections to make sure they are being completed and that remedial work is fixed.
Drivers of vehicles must be trained and competent to operate the vehicle safely.
Drivers with less experience need to be supervised and monitored to ensure they are operating the vehicle safely. Consider:
- initial and refresher training for drivers by competent persons/providers
- driving observations, with feedback on driving habits
- motion sensors/equipment monitors that log driver behaviour
- guidance material on specific vehicle training (eg ACOP for training operators and instructors of powered industrial lift trucks)
- training records for each driver
- medical checks to ensure drivers are fit to operate vehicles (being aware of medical issues).
Drug and alcohol policy and checks.
Finding out more:
Further information can be found at: