Alert: Notifications at reduced capacity during COVID-19 restrictions
We are operating at reduced capacity due to the COVID 19 alert level four requirements.
Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
A membrane filter method is required for air monitoring during Class A asbestos removal work.
What is a membrane filter method?
The ‘membrane filter method’ is the common method used to determine airborne asbestos fibre concentrations in the work environment. It refers to one of a number of published methodologies which set out specifications for sampling, processing and analysing equipment and procedures, supported by protocols for classifying, counting and reporting results.
The commonly used methodologies are:
- (Australia) NOHSC: 3003(2005) Guidance Note on the Membrane Filter Method for Estimating Airborne Asbestos Fibres (2nd Ed)
- (UK) HSG 248 Asbestos: The analysts' guide for sampling, analysis and clearance procedures 2005
- (International - ISO) ISO 8672-2014 Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
- (International - WHO) Determination of airborne fibre concentrations. A recommended method, by phase-contrast optical microscopy (membrane filter method), WHO Geneva 1997 (ISBN 92 4 154496 1)
- (US) ASTM STP834 Membrane Filter Method for Estimating Asbestos Fiber Exposure.
Class A air monitoring carried out by licensed asbestos assessor
Class A air monitoring should be conducted by an independent licensed asbestos assessor. Until 4 April 2018, a competent person may carry out Class A air monitoring.
The competent person or licensed assessor who undertakes air monitoring for Class A removal work must use a membrane filter method for the air monitoring.
The PCBU who commissions the removal work needs to make sure that the air monitoring results will provide correct information. A good way to do this is to confirm that the sample will be tested by a laboratory which is accredited for the particular membrane filter method which is used.
For information on laboratories that are accredited to use a membrane filter method search the list of IANZ-accredited laboratories(external link), and type membrane filter method in the Search by keyword field, then click Go.
For information on assessor licensing and a definition of a ‘competent person’, see the Overview.