Alert: Notifications and correspondence during COVID-19 restrictions
We are operating at reduced capacity due to the COVID 19 alert level four requirements. Find out more about how to correspond and notify us during this time.
When connecting a LPG cylinder – check all connection points for leaks by using a spray bottle of soapy water – if bubbles appear – there is a leak. Check connection fittings for damage or worn rubber seals.
Note connection fittings may have small rubber o-rings these need to be checked for damage, cracks etc and must be checked regularly. It’s good to remember to use the right tool for the right job as appropriate – check for obvious signs of damage to hoses and the appliance.
Keeping your gas cylinder safe
- Check all washers and o-rings on appliances and cylinders regularly.
- Never interfere with or remove the valve on any LPG cylinder.
- Do not turn the gas on until you are ready to light the appliance.
- Close the cylinder valve when appliances are not in use.
- Never use a flame to locate a leak.
- Always replace the dust cap on cylinders when not in use.
- Regulate the burner to your needs – flames should not go beyond the edge of the cooking vessel.
- Dispose of disposable canisters safely – do not incinerate them. Contact your local council for disposal details.